Megmeet Welding Machine

Features

Stabilized welding arc and low spatter at all output range. It is suitable for both root welding at low current and filling welding of high deposition efficiency at high current.

Strong penetration with concentrated welding arc. Heat input is lowered by 20% with smaller heat deformation for the same depth of penetration.

Outstanding performance in gap-filling welding with low sensitivity to wire stick-out; suitable for various welding positions and unskilled welders.

Dynamic droplet inspection and micro-control technology, which cuts output power immediately after the last metal transfer. The wire tip will be cleared to reduce time for ball-cleaning at situations of high quality welding. Better production efficiency can be ensured thanks to the higher success ratio of one-time ignition.

Direct achievement of locking-up with a password, multiple welding parameters, even extended functions thru the hot keys on the front panel, without any necessity and extra cost of additional equipment.

Default set of 10 welding parameters for both saving and activating. 99 sets are allowed at maximum for tailored design.

Analog communication with robot as optiona

Features

Full digital and intelligent control; superbly high frequency of 100KHz; zero delay in sampling circuit to gain precise reaction to the status of the metal droplet.

Unique desig n of power releasing allowing welding current to be lowered as fast as 10,000A / millisecond. The current force has the lowest impact on the melt at the moment of metal transfer. Applying worm gear motor of high torque and low inertia, and the highly precise code wheel of 120 lines and the HF motor control system. Start-up, braking and withdrawal at millisecond level are reached. Withdrawal at both the arc ignition and ending stage are controlled precisely. Together with the welding parameter control, optimum arc ignition and crater performance are gained.

Far-end sampling and compensation of both the positive and negative output. A clear and precise judgement of the transfer status, and an accurate control as a result, can be made even when output cable reaches 30m.

A stable and comprehensive hardware platform of high speed. The open software system makes it possible to expand process control program for different welding conditions and co ect expert database, meeting continuously updating process demands from customers.

Features

Full digital and intelligent control; superbly high frequency of 100KHz; zero delay in sampling circuit to gain precise reaction to the status of the metal droplet.

Unique desig n of power releasing allowing welding current to be lowered as fast as 10,000A / millisecond. The current force has the lowest impact on the melt at the moment of metal transfer. Applying worm gear motor of high torque and low inertia, and the highly precise code wheel of 120 lines and the HF motor control system. Start-up, braking and withdrawal at millisecond level are reached. Withdrawal at both the arc ignition and ending stage are controlled precisely. Together with the welding parameter control, optimum arc ignition and crater performance are gained.

Far-end sampling and compensation of both the positive and negative output. A clear and precise judgement of the transfer status, and an accurate control as a result, can be made even when output cable reaches 30m.

A stable and comprehensive hardware platform of high speed. The open software system makes it possible to expand process control program for different welding conditions and co ect expert database, meeting continuously updating process demands from customers.